Light Distressed Oak SFL-4516

$38.00 per m2

Measurement:

Area per Box: 2.085m2
Width: 228 mm
Length: 1524 mm
Plank thickness: 5 mm

Features:

  • 100% Water Resistant
  • R10 Slip Rated
  • 0.5mm Wear Layer
  • Anti-Bacterial Nano silver Technology
  • Micro Ceramic Surface
  • UV Coated
  • Fire, Slip, Oil & Stain Resistant
  • Reduces Impact & Sound Travel
  • Dimensionally Stable
  • Non Slip Backing
  • Durable & Low Maintenance
  • Quick & Easy Installation
  • Designed For No Underlay
  • Designed for No Expansion Gap
Actual Area (sq m) 2.09
Total Price $79.23
Category:

Additional information

Weight 20 kg
Dimensions 1500 × 20 × 5 cm

Installation

Please note: This is only a guide and we always recommend that you use professional installers for our products as incorrect installation or preparation of the subfloor would void warranty. Installation should be in accordance with Australian Standards – AS 1884 – 2012 Floor Coverings – Resilient Sheet and Tiles – Installation Practices.

Basic Tools Required for the Installation:

Stanley Knife, Tape Measure, Straight Edge, Square, String/chalk Line & if required 1.6mm V notch Trowel

Installation steps to Loose Lay planks:

  1. Take all the planks out of the box and stack them in piles of about 5 boxes high and allow them to acclimatize and level out for 24 hours prior to laying them between a recommended controlled temperature of 18°C– 28°C (Do not attempt installation in severe conditions if it’s less than 10°C or more than 35°C). Ensure the surface in which you lay them on is level/straight.
  2. Make sure you thoroughly clean your floor from all contaminates, (Sweeping, vacuuming & damp mopping may be required).
  3. Repair any damaged areas, holes, gaps and indentations by using a compound or anything recommended by your specialist. The floor will need to be level throughout the area that will be covered with the Loose Lay Vinyl Planks.
  4. Plan out the direction the planks will be laid as well as the starting point and think about how you will stagger the planks and what lengths you will be using. Please note: Do not use a piece shorter than 6 inches for the staggering of the planks.
  5. Begin by removing existing molding/skirting or undercut the jambs so planks can slide underneath for a clean finish. Alternatively you can put them up against the molding/skirting leaving no gaps or minimal as possible to avoid movement in the floor. For Domestic applications it is not essential to use adhesive, however, it may be ideal to trowel adhesive around the outside parameter using a 1.6mm V notched trowel to prevent movement of the floor or where ever else you may require it. For Commercial applications a minimum of grid style pattern gluing is required to prevent movement in the floor from heavy traffic.
  6. To ensure your wall is straight, use a string line/chalk line from one end of the wall to the other to ensure your planks begin straight when they are being laid. It is recommended to start laying the first row from the corner of your wall however you can begin laying at another point if you are required to. Make sure to measure the total width between the walls divided by the width of the plank to ensure the last piece is reasonable in size when laying it down.
  7. If Using Vinyl Adhesive you will need a 1.6mm V notched trowel, spread the adhesive on to the floor (evenly spreading the adhesive). Once the Adhesive has become tacky (you will notice the adhesive has a chewing gum like consistency if you touch it), the planks can then start to be laid on the adhesive. The time it takes for the adhesive to become tacky depends on the temperature in the room/area. It can take 10-60 minutes to become tacky, the warmer the temperature; the quicker it will become tacky. Please note: It is important to know the type of adhesive you are using as each adhesive by type/brand may have different structures therefore may need to be applied differently. Please ensure you consider the directions advised by the adhesive type/brand you are using. We highly recommend you to use our specified Adhesive with our product range.
  8. Lay the first row of planks in position and remember to face any planks that have been manually cut towards the wall to ensure the planks join in nice and tight. Ensure your first row is straight before commencing with the second row as this is vital to sustain a straight line in successive rows. To cut the planks use a straight edge or a plank and place it on the marked area where the cut needs to be made keeping the front image facing upright then score the plank with your Stanley knife and snap it down on a hard edge. If the plank does not snap off completely cut the plank from underneath and follow through until the pieces are separated.
  9. Begin laying the second row of planks down and at this point you need to use different size pieces to begin staggering the floor to create a random appearance, you can potentially use the last cut piece from your first row as the first piece for your second row. Keep in mind the piece you are using is not to be less than 6 inches as all the joins in the floor need to be apart by a minimum of that distance.
  10. Continue installing the remaining rows following the same instructions above and keeping note of all the requirements. Once all the flooring is laid you can then install the removed molding/ skirting or if you have undercut the jambs or laid the planks up against the molding/skirting you can cork/silicone/gap fill the gaps around the parameter for a clean finish.

Care & Maintenance

Luxury Vinyl Planks and other Vinyl Products are ideal for all areas in the home and most commercial environments.

Our collection ensures optimum style and premium quality that will provide many years of valuable performance.

We have done the hard work in the beginning to provide you a product that requires low maintenance but like everything it will still require some love and tender care.

Below are important but basic instructions on how to keep your floor looking new for years to come:

 

Cleaning After Installation:

  1. Gently remove all loose debris from the floor using a vacuum or a soft bristled broom/brush.
  2. If any adhesive is used and is visible on the surface remove immediately.
  3. Damp mop the floor with warm water or a pH neutral detergent.

Regular Maintenance:

  1. Vacuum, sweep or damp mop your floor to remove all dust and loose debris.
  2. When mopping just use warm water however if a deeper clean is necessary for stubborn dirt and marks you can use soapy warm water or a pH neutral detergent.
  3. Ensure all spills are quickly cleaned up, this will prevent stains.
  4. Ensure all furniture is fitted with felt pads on the base or feet of the object and never drag furniture across the floor, this will help prevent scratching and scuffing.
  5. Keep your floor away from direct sunlight by closing your shades or blinds to prevent discolouration from the sun as warranty does not cover this.

Warranty

Definitions:

  • “Wear Through” is defined, as the removal of the surface wear layer to the degree in which no colour and pattern is apparent.
  • “Commercial” is defined as one in which business is conducted.
  • “Residential” is defined as a private domestic residence.

 

Warranted Products:

  • Loose Lay: 30 year residential wear warranty and 15 year commercial wear warranty

 

Conditions:

The following is a list of conditions that have to be met for any Warranty Claims.

  • Product Warranty applies from the date of purchase only to the original purchaser and they must provide their full proof of purchase.
  • The product has been installed in accordance with the AS/NZS 1884 – 2012 Floor Coverings Act – Resilient sheet & tile – installations practices including the product installation Guide.
  • The sub floor meets the building standard under AS/NZS 1884 current at the time of installation and the appropriate recommended adhesives were used (where necessary) for the application.
  • The product used has been installed in the correct room or rooms specified by the supplier.
  • More than 5% of defect has to be apparent on the overall product.
  • The flooring has been maintained in accordance with the Maintenance Guide.

Exclusions:

The following is a list of exclusions that will not be covered under the Product Warranty.

  • Damage caused due to improper use or improper maintenance specified by Decohouse.
  • Damage caused due to improper handling of the product prior installation.
  • Defects caused by incorrect installation and/ or incorrect subfloor preparation, including insufficient attention to the subfloor dampness.
  • Damage caused by stains, excessive heat, cuts, scratches and/or other abuses that the floor may be subjected to during usage not determined as fair wear and tear.
  • Damage caused by indentation and abrasion, eg: unprotected castor wheels, furniture legs and all footwear.
  • Any claim resulting from a manufacturing defect which is not notified to the company prior to installation.
  • Any issues that arise from expansion and contraction of product due to extreme temperatures.
  • Any accidental damage such as fire or flood.
  • All installation & labour costs including the removal of the defected product and installation of a new product.
  • Fading and Discolouration.

 

Claims Process:

  • All claims must be submitted to Decohouse, from which the flooring was purchased. If Decohouse is no longer trading then you may submit your claim directly through the supplier office in writing.
  • All claims must be made as soon as they are apparent.
  • You must provide Decohouse with all the specific documents relevant to your job including your proof of purchase, product details, installation and subfloor information including the installer’s details, samples of the defected product with full photographs and a report of the defect including any areas related to the issue.
  • Once the claim has been submitted it will be referred on to the warranty team who will then investigate your case. At this point in time if more information is required to make the correct assessment they will get in touch with the relevant retailer. If the claim has been accepted we will advise your retailer to make arrangements to provide the same or similar replacement of the original product.

Delivery

We offer free pick up if delivery fees want to be avoided. Pick up can only be arranged after purchase is complete and paid for.

Pick up can will be done from Hallam VIC.

Delivery 

  • Delivery of the products will be affected in the manner described on this website. i.e. Items purchased online will (subject to availability) be dispatched by freight as soon as practicable after receiving full payment for your order (usually within one (1) business days). 
  • The purchaser or a legal representative of the purchaser must be on-site to receive the delivery and sign for the goods on the specified date of delivery. If no-one is present on-site to receive the order, goods will not be left unattended and an additional delivery fee will be charged for next attempt of delivery. 
  • You acknowledge and agree that any person at the delivery address who receives and signs for the delivery is authorised by you. 
  • The delivery driver will only help to carry the goods within 5m of where the delivery vehicle can safely park for the delivery. Goods will not be carried by hand by the driver up pathways, stairs or undriveable driveways. 
  • You or a representative will need to be at the delivery location to help unload. 
  • If alternative delivery or unloading arrangements are made by you or your representative without our knowledge and/or consent, you will be liable for additional costs incurred. 
  • We must have a street address for any order submitted. We can’t ship to PO Boxes. 
  • Risk of loss or damage to the goods passes to you upon delivery. 
  • Any damaged material must be reported immediately by email or phone to Decohouse and photos provided by email within 24hrs to make a claim. 
  • The customer must take measure to ensure goods are protected from the elements such as rain or flooding and are solely responsible for the goods immediately after delivery has been made. 
  • We undertake to comply with the terms of our Delivery Policy in relation to ensuring delivery in a timely matter. 
  • You acknowledge that we are not liable for any losses or damages suffered directly or indirectly by you as a consequence of any delay in dispatch or delivery. 
  • Only samples can be delivered without a signature if the purchaser has granted an “Authority to Leave” without signature at the time of checkout. If you grant “Authority to Leave”, you agree that Decohouse does not bear any responsibility or liability to you for any consignments that are lost or stolen after our carriers have recorded the parcel as “successfully delivered”. 

Delivery Times 

  • Delivery time frame: 3-5 business days for most metro areas, 7-10 business days for regional areas (depending on location). 
  • For metro Melbourne deliveries, we deliver Monday to Friday via a third party courier depending on the delivery location. Once payment for your order is received we will contact you prior delivery to arrange a delivery time.  
  • For interstate or rural Victoria orders, a third party freight company will be used. They will call you 24hrs prior to delivery to arrange a delivery time. Unfortunately, we will not be able to guarantee an exact date or time of delivery. 
  • There may be circumstances out of our control that could delay shipping or delivery. We accept your order on the basis that we cannot be responsible for delays including, but not limited to, delays out of our control. If there are any unexpected delays, we will advise you as soon as we are aware and keep you updated with the status of your order. 

Delivery Costs 

  • Freight and delivery charges will be notified to you at the time your order is placed, if applicable. These charges may depend on your location, size, weight and quantity of product(s) ordered. Orders for multiple products may be split across multiple deliveries if necessary.